51.2V · LiFePO₄
32.2 kWh Panda Edition
Compare this model’s specifications with your installation requirements. Inverter compatibility is confirmed for the exact model.
- Nominal energy
- 32.2 kWh
- Capacity
- 628Ah
- Weight
- 236kg
- Max. continuous charge / discharge
- 195 A 195A for charging and discharging
- DC power reference at nominal voltage
- 9.984 kW Calculated · 51.2V × 195A
- Discharge overcurrent protection
- 200 A Protection value from the product data
The DC reference is calculated from 51.2V × 195A. AC load capability depends on the inverter, conversion efficiency, battery voltage and settings. Contact us to confirm peak power and duration.
Reference price: $2,063
Reference prices exclude freight. Quantity, destination, taxes and exchange rate are confirmed in the quotation.
Technical specifications
| Cell option | EVE MB56 628Ah LiFePO₄ ↗ |
|---|---|
| Configuration | 16S1P |
| Nominal voltage | 51.2V |
| Capacity | 628Ah |
| Nominal energy | 32.1536kWh |
| Max. continuous charging current | 195 A |
| Max. continuous discharging current | 195 A |
| DC power reference at nominal voltage | 9.984 kW |
| Discharge overcurrent protection | 200 A |
| Active balancing current | 2 A |
| Charging cut-off voltage | 58.4 V |
| Discharging cut-off voltage | 43.2 V |
| Dimensions | 800 × 630 × 430mm |
| Weight | 236kg |
| Cooling | Natural cooling |
| Communication | RS485 / CAN |
| Operating temperature | Charge 0–55°C · Discharge −20–60°C |
| Storage temperature | −20–60°C |
| Peak power / duration | Contact us to confirm |
| Maximum AC load | Confirm with the inverter and configuration |
Choosing a battery for your project
When to compare this model
Consider this Panda model for around 32 kWh of nominal storage with EVE MB56 628Ah cells. Compared with the 30.1 kWh model, the displayed capacity is about 2.1 kWh higher and the weight increases by 34.5 kg. Review the capacity requirement and site conditions together.
Storage capacity and load capability
The supplied data lists 195A continuous discharge for all three capacities. Capacity determines stored energy. Confirm the inverter output, startup peaks and battery specifications for equipment that will run simultaneously.
Inverter matching
Solutions are available for selected models from the brands below. Send the complete inverter and battery models before ordering so we can confirm voltage, communication protocol and settings.
- LANTUVIA
- Growatt
- Solis
- Deye
- 雷凌
Supported communication protocol Pylontech · Confirm for the selected model
The current supply solution does not support GoodWe inverters.
Matching LANTUVIA inverter + battery
If an inverter has not been selected, ask about a matching LANTUVIA inverter and battery package. We can help select compatible models and configurations for the project.
Inverters · HFP 6.3 / 12.3 kW ↗Send your project location, loads, backup duration, complete inverter model and order quantity for selection support.
sales@lantuvia.com ↗How much home storage do you need?
Enter household size, floor area and appliance counts. No wattages or schedules required.
Capacity suggestion →Continuous-load runtime is supplementary; use daily energy for household planning.
Illustrative calculation: nominal energy × 90% discharge × 90% inverter efficiency ÷ average load. Full battery, no solar or grid input.
These are assumed average loads, not measured performance. AC consumption varies; washing excludes heating and drying. Actual runtime depends on temperature, reserve and losses. Simultaneous operation requires confirmation of battery/BMS output, inverter rating and starting current.
Before you order
Send the exact inverter model. CAN / RS485 interfaces do not guarantee compatibility with every inverter.
Lead time, shipping costs, documentation and applicable warranty terms are confirmed for your model and destination.
Product documentation
Request the model datasheet and available test or transport documents with your inquiry.
LANTUVIA · Installer & distributor inquiries
Discuss your project
Tell us the product, quantity and destination. We will use these details to respond to your inquiry.
Inside this battery: the cell
EVE MB56 628Ah
LiFePO₄ cell for energy-storage projects. Compare the cell data below or explore a matched assembled battery.
| Cell option | EVE MB56 628Ah |
|---|---|
| Capacity | 628 Ah |
| Nominal voltage | 3.2 V |
| Nominal energy (capacity × voltage) | 2009.6 Wh |
| Width W | 352.2 mm |
| Depth D | 71.7 mm |
| Height H | 206.7 mm |
| Body height | To confirm |
| Height with terminals | To confirm |
| Weight | 11.4 kg |
| Manufacturer cycle reference | 8000 cycles · 25°C · 0.5P/0.5P · 70% capacity retention |
| Standard charge / discharge rate | 0.5P / 0.5P |
| Charge temperature | 0–60°C |
| Discharge temperature | −30–60°C |
| Initial internal resistance | ≤0.25 mΩ |
Official reference dimensions in mm; not an installation drawing. Confirm body height, terminal-inclusive height and tolerances against the supplied revision.
Cycle figures are manufacturer references under the stated test conditions. P is a power rate; assembled battery performance depends on the BMS and supplied configuration.
Contact our customer service team to customize cells with welded studs.Ask about welded studs ↗
Reference prices exclude freight. Quantity, destination, taxes and exchange rate are confirmed in the quotation.
View cell details →